| 1. | The strain distribution of low - dimensional semiconductor materials
低维半导体材料应变分布 |
| 2. | The measurement of biological soft tissue internal strain distribution under compression
生物软组织内部压缩应变的测量与分析 |
| 3. | The analysis of strain distributions in quantum dot structures using a analytical approach
运用解析方法分析量子点的应力应变分布 |
| 4. | Commonly , ultrasound elastography can only obtain the axial strain distribution of tissues with an external compression
摘要超声弹性成像通常只能得到组织在外部压缩作用下的纵向应变分布。 |
| 5. | The proposed model is compared with experimental beams in the midspan cross - section deflections , strain distribution and the slip of supporting points
为验证有限单元法的正确性，对试验梁进行了跨中挠度、沿梁高应变分布及梁端滑移的计算分析。 |
| 6. | The stress - strain distributions and deformation characteristics of forming process are calculated and analyzed by the successive approximation numerical method based on the incremental strain theory
基于增量理论的逐步逼近数值法，计算分析了成形过程应力应变分布与变形特点。 |
| 7. | In this paper , a method by the use of the stress - strain relations and the iterative calculation based on the finite element analysis was proposed to reconstruct the elastic modulus distribution from the axial strain distribution of tissues
本文提出一种利用组织的应力应变关系和基于有限元分析的迭代计算方法，从组织的纵向应变分布重建出组织的弹性模量分布。 |
| 8. | The experimentation of the door outer ’ s viscous pressure forming under different blank holder pressures has been done . the strain distributions of the decorated rib and handle are obtained by the girding method and the thickness strain distributions are also obtained
通过网格分析法对试件关键部位(装饰筋和把手)的应变进行了分析,分析了粘性介质压力成形过程中成形试件的壁厚分布。 |
| 9. | Crack development and failure modes , longitudinal reinforcement strain distributions and load - deflection curves were compared as a result in order to evaluate the validity of the disturbed stress field model to analyse such deep simply supported beam
通过与试验结果的对比，在开裂形态、破坏形式、纵筋应变分布及荷载位移曲线等局部与整体反应层次上，评价了扰动应力场模型模拟深受弯简支梁受力性能的适用性。 |
| 10. | No matter with or without flange , the longitudinal strain in limbs roughly coincides with bernoulli ' s principle . 5 based on strain distribution status found in experiments , the internal force evaluation approaches are suggested . then , the structural behaviors are investigated in detail , and the concepts of pl and leffr are introduced
从墙肢应变分布研究入手，建立了截面内力计算模型，深入研究了短肢墙结构内力大小及其分布规律，建立了土墙肢及主墙肢荷载效应负载率等基本概念。 |
